BPHBL - DL1252, REPELL (BULK)
- MSDS: BPHBL
- Manufacturer: DRUMMOND AMERICAN CORP
- Product Name: DL1252, REPELL (BULK)
- National Stock Number: 9150-00N031165
Product Identification
Product ID:DL1252, REPELL (BULK)
MSDS Date:10/01/1990
FSC:9150
NIIN:00N031165
MSDS Number: BPHBL
Responsible Party
VERNON HILLS, IL 60061
US
Emergency Phone: 708-913-9313;303-623-5716
Info Phone: 708-913-9313
Preparer: RICK LOWE
Cage: 64557
Contractor
Telephone: 708-913-9313
Cage: 64557
Ingredients
ETHANE, 1,1,1-TRICHLORO-; (METHYL CHLOROFORM)
CAS: 71-55-6
RTECS: KJ2975000
OSHA PEL 350 PPM;450 STEL
ACGIH TLV: 350 PPM;450 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE DIZZINESS AND
UNCONSCIOUSNESS. REPEATED SKIN EXPOSURE MAY CAUSE IRRITATION.
CHLOROCARBON MATERIALS HAVE PRODUCED SENSITIZATION OF MYOCARDIUM TO
EPINEPHRINE IN LABORATORY ANIMALS AND COULD HA VE SIMILAR EFFECT IN
HUMANS. ADRENOMIMETICS (E.G., EPINEPHRINE) MAY BE CONTRAINDICATED
EXCEPT FOR (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: LIFE-SUSTAINING USES IN HUMANS
ACUTELY OR CHRONICALLY EXPOSED TO CHLOROCARBONS .
Medical Cond Aggravated by Exposure:MAY AGGRAVATE EXISTING EYE, SKIN,
OR UPPER RESPIRATORY CONDITIONS.
First Aid
First Aid:INGESTION: DO NOT INDUCE VOMITING. IF VOMITING OCCURS, KEEP
HEAD BELOW HIPS TO PREVENT ASPIRATION INTO LUNGS. CALL PHYSICIAN.
INHALATION: REMOVE TO FRESH AIR. SKIN: WASH SKIN WITH SOAP AND
WATER. EYES : FLUSH WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:TCC
Extinguishing Media:FOAM, CO2, WATER FOG, SAND.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AVOID OPEN FLAMES, WELDING ARCS OR OTHER
HIGH TEMPERATURE SOURCES WHICH INDUCE THERMAL DECOMP. THERMAL
DECOMPOSITION PRODUCTS MAY INCLUDE HCL & PHOSGENE .
Accidental Release
Spill Release Procedures:SMALL SPILLS: MOP UP, WIPE UP, OR SOAK UP
IMMEDIATELY. DO NOT FLUSH TO SEWER. LARGE SPILLS: EVACUATE AREA.
CONTAIN LIQUID: TRANSFER TO CLOSED METAL CONTAINERS. KEEP OUT OF
WATER SUPPLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID BREATHING VAPORS. STORE IN COOL
DRY PLACE.
Other Precautions:PLEASE READ & FOLLOW DIRECTIONS ON PROD LBL. THEY ARE
YOUR BEST GUIDE TO USING THIS PROD IN MOST EFT WAY, & GIVE NEC
SAFETY PREC TO PROT YOUR HLTH. NO SMOKING IN AREA OF USE. DO NOT
USE IN GEN VICINIT Y OF ARC WELDING, OPEN FLAMES/ (SUPDAT)
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR-TYPE
RESPIRATOR IN ABSENCE OF PROPER ENVIRONMENTAL CONTROL.
Ventilation:LOCAL EXHAUST: HOOD OR FAN. MECHANICAL: MAINTAIN ADEQUATE
VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWERS SHOULD
BE AVAILABLE.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM.
SMOKE IN SMOKING AREAS ONLY.
Supplemental Safety and Health
HMIS(LEVIEN) NOTES THAT 1,1,1-TRICHLOROETHANE IS CLASSIFIED AS POISON
6.1,III.OTHER PREC: HOT SURFACES. HEAT AND/OR UV RADIATION MAY
CAUSE THE FORMATION OF HCL AND/OR PHOSGENE .
Chemical Properties
HCC:T4
Boiling Pt:B.P. Text:165F,74C
Vapor Pres:100 @ 20C
Vapor Density:HVR/AIR
Spec Gravity:1.24
Evaporation Rate & Reference:0.37 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOW/BROWN LIQUID, MILD CHLORINATED ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
CONTACT OR STORAGE IN ALUMINUM AND ITS ALLOYS.
Stability Condition to Avoid:AVOID OPEN FLAMES, WELDING ARCS OR OTHER
HIGH TEMPERATURE SOURCES WHICH INDUCE THERMAL DECOMPOSITION.
Hazardous Decomposition Products:HYDROGEN CHLORIDE AND VERY SMALL
AMOUNTS OF PHOSGENE AND CHLORINE.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.